3 Configuration and commissioning of the Service Bridge
Service Bridge – Setup and Configuration
Entry ID: 109747975, V1.4, 05/2019
Siemens AG 2019 All rights reserved
3.7.2 System time
In order to facilitate troubleshooting and the analysis of logs, it is recommended
that the system time be set or synchronized correctly, depending on the system
requirements. Setting up the synchronization / the adoption of the PC system time
takes place via the "System > System time" menu.
Applying the PC system time
1. Navigate to the "System > System Time" menu (1)(2).
2. Click on "Use PC Time" (3) and confirm the settings with the "Set Values"
button (4).
For instructions on how to set the time synchronization, refer to the manual of the
switch:
https://support.industry.siemens.com/cs/ww/en/view/109750283
To Next Page
Loading...
