Siemens Industry, Inc. 20 A6V12198161_en--_a
Smart Infrastructure
Figure 7–3: Launching the Primary Setup Tool
• A list of all found devices displays on the left-hand side of the PST.
• Expand the device by clicking the plus symbol (+) before the device name.
• Click Ethernet Interface. The PST displays the input dialog for the configuration data in
the right-hand pane of the program window.
• Select the Assign IP Parameters option button and enter the IP address for the device
in the IP address box.
• In the Subnet mask box, enter 255.255.255.0 as the Subnet mask.
To Next Page
Loading...
