Siemens Industry, Inc. 36 A6V12198161_en--_a
Smart Infrastructure
7.5 Diagnostics
Diagnostics of the fiber switch can be done remotely, as explained below:
1. Launch web browser and type in URL of the fiber switch on which diagnostics will be run.
2. The LEDs status on the top left of the screen are the exact same as that shown on the fiber
switches.
a. Red LEDs indicate an error.
b. Green LEDs indicate that the switch is running properly.
c. Green LEDs also indicates ports that have an Ethernet connection to them.
Figure 7–22: Fiber Switch Diagnostic Indicators
To Next Page
Loading...
Need help?
General