8 Operation at Use of a PC
8.4 Value View and Evaluation
228 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Viewing Measured Values and Indications
✧ In the Information column (see Figure 8-69), click View values:
Figure 8-79 View Values
Measured values and indications are displayed for the respective Modbus slave device.
For measured values, *** is displayed and for indications, 'invalid' is displayed if the value was received with
an Invalid identifier or the value could not be read (for example, interrupted connection to the Modbus slave
device).
NOTE
The button is not enabled if the status shows deactivated and no mapping data, see table 8-34.
To Next Page
Loading...
