Siemens SICAM Q100 - Page 57

4 Measured Quantities and Recording
4.2 Measured Quantities
57SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
1)
It is not available for IEC 61850 report.
4.2.2.2 Data Availability of the Harmonics/Interharmonics
ca I x HTML
x
1)
Frequency
f (System freq.) x x x
Table 4-9 Data Availability of the Operational Measured Quantities (cont.)
Measured
Quantity
Limit violation HTML and Display
Operational Measured
Quantities
Protocol/Interface
Modbus TCP, Modbus RTU,
IEC 61850
10/12 cycles
or
150/180 cycles
10/12 cycles
or
150/180 cycles
10/12 cycles
or
150/180 cycles
Table 4-10 Data Availability of the Harmonics/Interharmonics
Measured Quantity
(x = 1 to 63,
y = 1 to 49)
x1 = Fundamental
Limit violation HTML and Display
Operational Measured
Quantities
Protocol/Interface
Modbus TCP, Modbus RTU,
IEC 61850
10/12 cycles
or
150/180 cycles
10/12 cycles
or
150/180 cycles
10/12 cycles
or
150/180 cycles
Harmonics, Voltage, Magnitude
H_Va-x - x
x
1)
H_Vb-x - x
x
1)
H_Vc-x - x
x
1)
H_Vab-x - x
x
1)
H_Vbc-x - x
x
1)
H_Vca-x - x
x
1)
Interharmonics, Voltage, Magnitude
HI_Va-y - HTML -
HI_Vb-y - HTML -