Expansions and configuration
10.4 Installing disk drives
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
10-13
Removing 3.5" drives
How to remove 3.5" drives
1 Remove the drive bay module.
2 Disconnect the power supply and the data cable from the drive
3 Remove the 4 screws (1) of the
drive
4 Take the drive out of the bay
Note
Note that special screws with inch threads (6-32 x 3/16'' St G3E) are used!
To Next Page
Loading...
