Technical specifications
10.1 Standards and approvals
ET 200MP Distributed I/O System
98 System Manual, 01/2013, A5E03723484-01
ATEX approval
In accordance with EN 60079-15 (Electrical apparatus for potentially explosive atmospheres;
Type of protection "n") and EN 60079-0 (Electrical apparatus for potentially explosive gas
atmospheres - Part 0: General Requirements)
,,*([Q$,,&7*F
Tick mark for Australia and New Zealand
The ET 200MP distributed I/O system meets the requirements of the standard
AS/NZS CISPR 16.
Korea Certification
KC registration number: KCC-REM-S49-ET200MP
Please note that this device corresponds to limit value class A in terms of the emission of
radio frequency interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
IEC 61131
The ET 200MP distributed I/O system meets the requirements and criteria of the standard
IEC 61131-2 (programmable logic controllers, part 2: Equipment requirements and tests).
Industrial use
SIMATIC products are designed for industrial applications.
Table 10- 1 Industrial use
Area of
application
Interference emission requirements Interference immunity requirements
Industry EN 61000-6-4: 2007 EN 61000-6-2: 2005
To Next Page
Loading...
Need help?
General
