Technical specifications
10.1 Standards and approvals
ET 200MP Distributed I/O System
System Manual, 01/2013, A5E03723484-01
99
Use in residential areas
Note
The ET 200MP is intended for use in industrial areas; use in residential areas may have an
impact on radio/TV reception.
If you want to use the ET 200MP in residential areas, you must ensure that its radio
interference emission complies with limit value class B in accordance with EN 55011.
Suitable measures for achieving RF interference level Class B include, for example:
● Installation of the ET 200MP in grounded switchboards/control cabinets
● Use of noise filters in the supply lines
To Next Page
Loading...
