Siemens SIMATIC HMI KTP400 Basic User Manual

Preface
Basic Panels 2nd Generation
4 Operating Instructions, 10/2016, A5E33293231-AB
Scope
These operating instructions are valid for all versions of the SIMATIC HMI Basic Panels. The
following naming conventions apply:
Device designation
SIMATIC HMI
Device type
Interface type
Can be configured with
KTP400 Basic
Touch device with
function keys
PROFINET
WinCC (TIA Portal) as of V13
1
KTP700 Basic PROFINET
KTP700 Basic DP
PROFIBUS
KTP900 Basic
PROFINET
KTP1200 Basic
PROFINET
KTP1200 Basic DP
PROFIBUS
1
Devices are configurable as of WinCC V13. The description in this manual relates to V14 or
higher.
Basic knowledge required
Knowledge of automation technology and process communication is necessary to
understand the operating instructions.
An understanding of the use of computers and operating systems is also required.

Siemens SIMATIC HMI KTP400 Basic Specifications

General

Display Type	TFT LCD
Resolution	480 x 272 pixels
Touchscreen	Yes
Backlighting	LED
Color Depth	16-bit
Power Supply	24 V DC
Mounting	Panel mounting
Operating Temperature	0 to 50 °C
Display Size	4.3 inches
Display Colors	65K colors
Power Consumption	Approx. 3.6 W
Protection Rating	IP65 (front)
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
Interfaces	PROFINET

Summary

Safety instructions

General safety instructions

Provides essential safety guidelines for operating and installing the HMI device.

Notes about usage

Covers important usage considerations, including environmental and application limits.

Mounting and connecting

Preparations

Mounting the HMI device

Details the process of physically installing the HMI device into a panel.

Connecting the HMI device

Explains the procedures for connecting power, communication, and other interfaces.

Switching on and testing the HMI device

Operating the device

General functions of the screen keyboard

The screen keyboards

Entering data

Configuring the device

Opening the settings

Describes how to access the device's configuration menu via the Start Center.

Overview of functions

Lists and briefly describes all available configuration functions.

Save to external storage medium – Backup

Restore from external storage medium – Restore

Changing the IP address and device name of a controller

Guides on how to assign IP addresses and device names to connected controllers.

Editing communication connections

Describes how to modify parameters for existing controller communication connections.

Changing the password settings

Explains how to set or change passwords for unauthorized access protection.

Calibrating the touch screen

Changing the monitor settings

Commissioning a project

Overview

Explains the phases of project configuration and commissioning.

Operating modes

Describes the different operational states of the HMI device (Offline, Online, Transfer).

Transfer

Covers the process of transferring projects from a PC to the HMI device.

Testing a project

Details methods for testing the project offline and online.

Backup and restore

Updating the operating system

Resetting to factory settings

Maintenance and care

Maintenance and care

Technical specifications

Electromagnetic compatibility

Mechanical ambient conditions

Climatic ambient conditions

Power supply

Specifies the rated voltage and tolerance range for the HMI device.

Interfaces

Details the types and specifications of communication interfaces.

Scope of functions with WinCC

Technical Support

Service and support