Siemens SIMATIC IPC PX-39A User Manual

SIMATIC IPC PX-39A
102 Operating Instructions, 08/2022, A5E51699601-AA
Standards and approvals
10
10.1 Scope
Note
Scope
The possible approvals are described below. The approvals applicable to your device are
indicated on the nameplate.
10.2 CE marking
The device meets the general and safety-related requirements of the following directives and
conforms to the harmonized European standards (EN) published in the official gazettes of the
European Union:
• 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive)
The device is designed for the following areas of application corresponding to the CE
marking:
Scope of application
Requirement for
Interference emis-
sion
Immunity to inter-
ference
Industry
EN 61000-6-4
EN 61000-6-2
The devices are compliant with the standards EN 61000-3-2 (Harmonics Current Emissions) and
EN 61000-3-3 (Voltage Fluctuations and Flicker).
1)
1) Applies to devices with AC voltage supply
• 2014/35/EU "Electrical equipment designed for use within certain voltage limits" (Low-
Voltage Directive)
Conformance with this standard has been verified according to IEC/EN 61010-2-201
1)
.
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Panel PC certificates
(http://support.automation.siemens.com/WW/view/en/10805572/134200).

Siemens SIMATIC IPC PX-39A Specifications

General

Brand	Siemens
Model	SIMATIC IPC PX-39A
Category	Industrial PC
Language	English