Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC PX-39A
50 Operating Instructions, 08/2022, A5E51699601-AA
3.3.6 Connecting the device to networks
The following options are available for the integration in existing or planned system
environments or networks:
Ethernet
You can use the integrated Ethernet interfaces (10/100/1000 Mbps) for communication and
data exchange with automation devices, e.g. SIMATIC S7.
You need the "SOFTNET S7" software package for this.
PROFINET
PROFINET can be operated via:
• Standard Ethernet interfaces (RT)
SIMATIC NET
Use this software package to create, operate and configure an innovative network for Field &
Control level. You can find information on this under SIMATIC NET
(http://w3.siemens.com/mcms/automation/en/industrial-
communications/Pages/Default.aspx).
The software package and the documentation are not included in the scope of delivery.
Additional information
You can find additional information on the Internet at: Technical Support
(https://support.industry.siemens.com).
To Next Page
Loading...
