Siemens SIMATIC IPC PX-39A User Manual

Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC PX-39A
Operating Instructions, 08/2022, A5E51699601-AA
49
3.3.5 Connecting expansion cards
This section applies to devices with expansion cards.
CAUTION
Fire hazard due to overheating of the device
Expansion cards generate additional heat. The device can overheat or cause a fire.
• Observe the safety and installation instructions for the expansion cards.
• Observe the max. permissible power consumption values for the device.
• When in doubt, install the device in an enclosure that meets the requirements of
paragraph 9.3.2 of the IEC/UL/EN/DIN-EN 61010-2-201 standard.
Requirements
• The device is switched off.
Procedure
The procedure is described based on the example of a USB expansion card.
1.
Connect the cable to one of the indicated
slots.

Siemens SIMATIC IPC PX-39A Specifications

General

Brand	Siemens
Model	SIMATIC IPC PX-39A
Category	Industrial PC
Language	English