Siemens SIMATIC IPC PX-39A User Manual

Operating the device
5.3 Monitoring of the device
SIMATIC IPC PX-39A
58 Operating Instructions, 08/2022, A5E51699601-AA
5.3.2 SIMATIC IPC DiagBase
If you have ordered your device with a Microsoft® Windows® operating system, the SIMATIC
IPC DiagBase monitoring software is installed.
Information on the software and documentation of SIMATIC IPC DiagBase can be found
under:
• SIMATIC IPC DiagBase (https://support.industry.siemens.com/cs/ww/en/view/109749690)
• Important instructions and manuals for operating the device (Page 10)
5.3.3 SIMATIC IPC DiagMonitor
The SIMATIC IPC DiagMonitor monitoring software can be ordered optionally.
If a device is ordered with SIMATIC IPC DiagMonitor, the software is included with the device
in the delivery state.
Information on the software and documentation of SIMATIC IPC DiagMonitor can be found
under:
• SIMATIC IPC DiagMonitor
(https://support.industry.siemens.com/cs/ww/en/view/39129913)
• Important instructions and manuals for operating the device (Page 10)
Note
SIMATIC IPC DiagMonitor version 5.1.7 and higher
SIMATIC IPC DiagMonitor only supports the device hardware as of version 5.1.7.
Older versions do not support the device hardware.
See also
Software accessories (Page 18)

Siemens SIMATIC IPC PX-39A Specifications

General

Brand	Siemens
Model	SIMATIC IPC PX-39A
Category	Industrial PC
Language	English