Siemens SIMATIC IPC PX-39A User Manual

Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC PX-39A
44 Operating Instructions, 08/2022, A5E51699601-AA
Requirement
• The device has been installed.
• You have observed the information under "Country-specific information on supply voltage
(Page 41)".
• Screwdriver T10
Procedure
1. Make sure that the ON/OFF switch is in position "O" (Off) to avoid unintentional startup of
the device when you plug in the power cord.
2. Insert the capacitor IEC plug at the marked position.
3. Connect the power cable with the safety power outlet.
4. If necessary, install the enclosed cable grip.
See also
Connecting the protective conductor (Page 42)

Siemens SIMATIC IPC PX-39A Specifications

General

Brand	Siemens
Model	SIMATIC IPC PX-39A
Category	Industrial PC
Language	English