Siemens SIMATIC IPC277D

Technical specifications
9.6 BIOS description
SIMATIC IPC277D
152 Operating Instructions, 12/2016, A5E03409486-AE
9.6.3.8
Exit menu
You always exit BIOS Setup in this menu.
Settings in the Exit menu
Exit Saving Changes All changes are saved and the system is restarted with the new
parameters.
Exit Discarding Changes All changes are discarded and the system is restarted with the old
parameters.
Save Changes All changes are saved.
Discard Changes
All changes are discarded.
Current profile Standard The BIOS settings are saved in the Flash
memory.
User The BIOS settings are retained with <F9> "load
defaults".
Manufacturer This setting is only used for production purposes.
Do not use.
Load <Stand-
ard|User|Manufacturer> profile
Loads the values of the respective profile.
Save user profile
Saves the user profile values.