Device maintenance and repairs
8.4 Installing the software
SIMATIC IPC277D
96 Operating Instructions, 12/2016, A5E03409486-AE
Installation of Windows 7
Note
Specific information on using the Windows
operating systems is available in the following
manual (not included in the scope of delivery): Windows
7 Technical Reference (MS Press
● A USB DVD-ROM drive
● Recovery DVD for the operating system you want to install, which is included in the scope
of delivery.
1. Enable "USB Boot" in the BIOS setup.
2. Connect the DVD drive to the USB port.
3. Insert the recovery DVD into the DVD drive.
4. Reboot the device.
5. Press the <F12> key when the following BIOS message appears.
Press F2 to go to Setup Ulility
Press F12 to go to Boot Manager
After initialization, a boot menu is displayed.
6. In the boot menu, select the optical drive using the cursor keys.
Example:
USB-ODD : Optical Disk Drive
7. Confirm the selection by pressing ENTER.
8.
press any key when you see the following prompt to install the operating
system from the Recovery DVD.
Press any key to boot from CD or DVD ..
After a few seconds, you will see the "Install Windows" installation program.
9. Now follow the instructions in the installation program. You can find additional information
on this in the section: "Install Windows" installation program.
To Next Page
Loading...
