Siemens SIMATIC IPC277D

Technical specifications
9.6 BIOS description
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE
153
9.6.4
BIOS Setup default settings
Documenting your device configuration
If you have changed any default settings in Setup, you can enter them in the following table.
You can then refer to these entries for any future hardware modifications.
Note
Print out
the table below and keep the pages in a safe place once you made your entries.
Note
The default setup settings vary depending on the ordered device configuration.
If you have changed any default settings in Setup, you can enter them in the following
table.
You can then refer to these entries for any future hardware modifications.
BIOS Setup default settings
System parameters
Default settings
Local settings
Main
System Time
hh:mm:ss
System Date
MM/DD/YYYY
System parameters
Default settings
Local settings
Advanced>Peripheral Configu-
ration
Onboard Ethernet 2
Enabled
System parameters
Default settings
Local settings
Advanced>Video Configuration
Panel brightness
<85%>