Siemens SIMATIC IPC547J - Current;power requirements and power supply

Technical specifications
8.3 Current/power requirements and power supply
Operating Instructions, 01/2021, A5E43920357-AA
147
8.3 Current/power requirements and power supply
8.3.1 Current and power requirements of the system components
Maximum current values
Component
Voltage
+3.3 V
+5 V
+12 V
+12 V2
-12 V
5 Vaux
Motherboard Core i3 / i5 / i7 / i9
CPU with cooling
1
0.7 A
4.5 A
1.3 A
6.0 A
0 A
0.5 A
Motherboard Xeon processor
with cooling
1
0.7 A
7.0 A
1.3 A
6.7 A
0 A
0.5 A
SSD SATA (typical)
0.8 A
Hard disk drive
1
SATA (typical
values)
0.6 A
0.3 A
Hard disk drive
1
SATA type
Enterprise (typical values)
0.5 A
0.7 A
M.2 NVMe SSD
2.24 A
Internal fan
0.25 A
Triple Head graphics card (P440)
3.3 A
1.5 A
Quad Head graphics card (P2200)
0.4 A
6.3 A
Single currents AC, max.
permitted
20 A
2
25 A
2
14 A
11 A
0.1 A
2.0 A
3
Single currents AC redundant,
max. permitted
20 A
2
20 A
2
16 A
16 A
0.5 A
3.0 A
Total power consumption,
permissible
230 W
Efficiency of the simple power
supply
1
Approx. 88% (230 V AC), approx. 88% (120 V AC)
Efficiency of the redundant
power supply
1
Approx. 89% (230 V AC), approx. 87% (120 V AC)
1
Depends on the selected device configuration
2
The accumulated power of the +5 V and + 3.3 V voltage may not exceed 190 W with ATX power
supply and 100 W with ATX redundant.
3
2.5 A for 10 seconds
Typical power values
Component Current consumption
(AC-SV, U=230 V)
Power consumption
Basic device Core i3 / i5 / i7 / i9
0.55 A
127 W
Base device Xeon
0.58 A
120 W
1 × hard disk drive SATA
0.03 A
7.3 W
2 × hard disk drives SATA
0.07 A
14.7 W