EasyManua.ls Logo

Siemens SIMATIC IPC547J - Safety instructions; General safety instructions

Siemens SIMATIC IPC547J
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions, 01/2021, A5E43920357-AA
39
Safety instructions
2
2.1 General safety instructions
Danger if work is performed incorrectly
WARNING
The installer of the system is responsible for the safety of a system in which the device
is integrated.
There is a risk of malfunction if work on the device is carried out incorrectly, if the device is
faulty, or if it is integrated incorrectly into a system.
Death or serious bodily injury can result.
Make sure that only appropriately qualified personnel work on the device or on a system.
Danger to life when the control cabinet is open
WARNING
Electrocution risk when control cabinet is open
When you open the control cabinet, there may be a dangerous voltage at certain areas or
components.
Touching these areas or components can cause death or serious physical injury.
Always disconnect the cabinet from the mains before opening it.
Ensure that the power to the control cabinet cannot be turned on accidentally.

Table of Contents

Other manuals for Siemens SIMATIC IPC547J

Related product manuals