Hardware description
A.2 Expansion cards
Operating Instructions, 01/2021, A5E43920357-AA
173
A.2 Expansion cards
A.2.1 Interrupt assignment of the slots for expansion cards
e
All system resources (hardware addresses, memory allocation, interrupt allocation, DMA
channels) are dynamically assigned by the firmware or the operating system
based on the
hardware equipment, drivers, installed expansion cards and connected external d
evices.
The assignment is made automatically and depends on the requested resources of the
connected devices and installed components. Due to this configuration de
pendency, clear
statements can only be made by determining them in relation to the system in
the final
The resources can be viewed in Windows as follows:
Press the "Windows® key" and "R" simultaneously.
Enter the "msinfo32" command in the "Open" field.
Motherboard SMS-H410
Information on the slots can be found under "Technical specifications of the expansion card
slots (Page 153)".
PCI Dev0
PCI Dev1
0:1:0
Port 5
To Next Page
Loading...
Need help?
General
