5.9 Configuring the SFC button
Introduction
For selecting an SFC, you can also configure any graphic object of your choice. Such an object
serves to represent the SFC chart. Unlike an SFC status display, however, it does not receive
any information on the current status of the SFC. Such an object can be a button, for example.
Procedure
The procedure is basically the same as that for configuring the SFC control:
1. Select the "Button" object from the "Windows Objects" view and draw a frame in the graphic
display.
A dialog box opens.
2. Make the required settings (text input for label, font, operator authorization, etc.). Click "OK"
to close the dialog box.
3. Double-click "Configure SFC button" in the Dynamic Wizard.
4. If an instructional page appears, exit it by clicking "Next".
5. On the next page, select the mouse action for opening the SFC, which you will assign in
the next step.
The "SFC Browser" opens.
6. Select the SFC to be associated with the button.
7. In the "Set Option" dialog box, choose the display in which the SFC is to be opened
("Faceplate", "Overview" or "Section").
8. Click "Finish" to complete the configuration.
Configuration
5.9 Configuring the SFC button
SFC Visualization (V9.0)
Programming and Operating Manual, 05/2017, A5E41356392-AA 25
To Next Page
Loading...
Need help?
General
