6.27 "Properties" Dialog Box for the Start Condition
"Properties" dialog box of the start condition
This dialog box shows the start conditions of the sequencer.
The values and conditions of the sequencer are visualized similar to a transition.
Each condition consists of the following elements:
● A left address, an operator and a right address.
● Optionally, an "f(x)" button is displayed for the left or right address in a row when a
calculation is configured for the associated address.
The "f(x)" button opens the "Calculation for SFC" dialog. The current values of the
calculation results and the output variables are displayed in the dialog. The structure is
similar to the test mode of the dialog box in SFC, but none of the fields can be edited like
in test mode.
● Optionally, the "Condition (technological)" button appears when a technological condition
is configured in this row.
In addition, the background color, such as "light green", in a row indicates that a
technological condition is configured. The color for technological objects can be set in the
CFC editor.
You can use the "Condition (technological)" button to open a dialog box that displays the
current values of the condition.
You can find additional information about this in the section ""Properties" Dialog Box for the
Transition (Page 74)".
Operating and monitoring SFCs
6.27 "Properties" Dialog Box for the Start Condition
SFC Visualization (V9.0)
Programming and Operating Manual, 05/2017, A5E41356392-AA 71
To Next Page
Loading...
Need help?
General
