6.3 "SFC chart" faceplate, "SFC section" view
"SFC section" view
SFC faceplate, "SFC section" view
The faceplate is divided into two parts, the detail view is on the left, the overview display is on
the right. The following information is contained in the faceplate:
● The overview line with the elements for the group display, message acknowledgment,
message suppression, batch assignment and selection of the views.
– "Continuous mode" status flag for bumpless changeover, for example, when restarting
an SFC to avoid having to switch it off first. Display if output QCONT = 1.
– "Ready to complete" status display, when the SFC is not self-terminating (SELFCOMP
= 0) and is waiting in the run state for the "Complete" command (display, if READY_TC
= 1).
● An overview of the SFC with selection for synchronization.
● Control and display section of the SFC
Operating and monitoring SFCs
6.3 "SFC chart" faceplate, "SFC section" view
SFC Visualization (V9.0)
34 Programming and Operating Manual, 05/2017, A5E41356392-AA
To Next Page
Loading...
