6.10 "SFC Instance" faceplate, "Batch" view
View "Batch"
This view contains the elements of the following view: "SFC Instance" faceplate, "Actual
Values" view (Page 37), as described in 1 and 2 (see there). Here, the Batch window is
displayed instead of the elements listed under 3 to 6.
Batch window in the SFC instance faceplate
Meaning
● "Batch control" box:
– The "Enable" option shows if the SFC is enabled for "Simatic BATCH".
– The "Allocated" option shows if the SFC is assigned to "Simatic BATCH" ("Allocated"
can only be set if "Enable" is also set).
● "Batch" box:
– "Name" shows the current product name from "Simatic BATCH".
– "Step" shows the current step number from "Simatic BATCH".
– "ID" shows the current ID from "Simatic BATCH"
Operating and monitoring SFCs
6.10 "SFC Instance" faceplate, "Batch" view
SFC Visualization (V9.0)
Programming and Operating Manual, 05/2017, A5E41356392-AA 45
To Next Page
Loading...
