Siemens SIMATIC PCS 7 - Operating State Logic; Operating State Logic for SFC (SFC OSL)

6.32 Operating state logic
6.32.1 Operating State Logic for SFC (SFC OSL)
Introduction
A change of the current operating state of the SFC OSL can be triggered by the following
events:
● Commands (Start, Resume, Hold, etc.) in "MANUAL" or "AUTO" mode
● External signals (inputs of the SFC, commands from another SFC, etc.)
● Internal signals (commands from user-specific sequencers, from test mode or SFC
Visualization)
● Implicit status change
Operating and monitoring SFCs
6.32 Operating state logic
SFC Visualization (V9.0)
Programming and Operating Manual, 05/2017, A5E41356392-AA 79