Siemens SIMATIC PCS 7 - Acknowledging Operator Prompts and Step Errors

6.24 Acknowledging Operator Prompts and Step Errors
Acknowledging operator prompts and step errors
The group acknowledgement button can be used to acknowledge all active operator
prompts and step errors at one time (using the "S" button for steps and the "O"
button for transitions).
Note
In the event of a step runtime error, after it has been acknowledged, the step is returned to the
state which it had before the error occurred
(for example active = "green").
Operating and monitoring SFCs
6.24 Acknowledging Operator Prompts and Step Errors
SFC Visualization (V9.0)
68 Programming and Operating Manual, 05/2017, A5E41356392-AA