The "Calculation for SFC" dialog box in SFV has only two buttons:
● The "Close" button for closing the dialog box.
● The "Jump-to-picture" button for initiating the "Jump-to-picture" function.
Icon Meaning
The button is deactivated when no address is selected or an address belongs to a block
that has no faceplate.
The button is activated when an address is selected and the address belongs to a block
that has a faceplate.
Clicking the activated button takes you to the corresponding process picture and face‐
plate.
Functions of the OS
The "Calculation for SFC" dialog box is also acquired by the "Save picture combination" and
"Recall picture combination" functions on the operator station. With the "Recall picture
combination" function, the dialog box with the saved context is restored.
Operating and monitoring SFCs
6.30 "Calculation for SFC" dialog box in SFV
SFC Visualization (V9.0)
Programming and Operating Manual, 05/2017, A5E41356392-AA 77
To Next Page
Loading...
