SIMATIC Automation Tool API for .NET framework
6.9 The ICPU interface
SIMATIC Automation Tool V2.1 user guide
Manual, V2.1.1 07/2016, A5E33042676-AC
113
IRemoteInterface properties
The IRemoteInterface interface supports the following properties. These properties are read-
only.
A list of any decentralized I/O
stations connected to this re-
The communications protocol
for this remote interface
See also RemoteInterfaceType
The configured name for the
The Devices property can be used to traverse a decentralized network. Each device in the
decentralized network is represented by an
IBaseDevice interface. This interface has a
subset of the properties available for an
IProfinetDevice and provides the limited
functionality available for these devices in the SIMATIC Automation Tool API.
The following properties are available on the
IBaseDevice interface.
Does the device support the
Does the device support chang-
This allows the user to assign a
comment for the device. This is
used in the SIMATIC Automa-
tion Tool user interface and is
not relevant to API operations.
Does the DNN for the device
show that it has been config-
A description of the hardware
item, based on the article num-
ber. This is the same description
that the user would see in TIA
Portal.
(i.e. "CPU-1215 DC/DC/DC")
Based on its Article number, Is
What is the "family" of the de-
vice? For more information,
refer to the description of the
DeviceFamily enumeration.
Does this device support firm-
To Next Page
Loading...
