Siemens SIMATIC S7 - ET 200 SP Support (PROFINET I;O); ET 200 MP Support (PROFINET I;O)

SIMATIC Automation Tool device support
7.5 ET 200SP support (PROFINET I/O)
SIMATIC Automation Tool V2.1 user guide
124 Manual, V2.1.1 07/2016, A5E33042676-AC
7.5
ET 200SP support (PROFINET I/O)
ET 200SP operation support and firmware version
A check mark (✓) means that the operation is supported.
ET 200SP
V1.0
V1.1
V2.1
V2.2
V3.0
V3.1
V3.2
Scan for devices
✓
✓
✓
✓
✓
✓
✓
Flash LED
✓
✓
✓
✓
✓
✓
✓
Set IP address
✓
✓
✓
✓
✓
✓
✓
Set PROFINET name
✓
✓
✓
✓
✓
✓
✓
Set time to PG/PC time
Program update
Firmware update
✓
✓
✓
✓
✓
✓
✓
Put CPU in RUN/STOP
Reset CPU memory
Read Diagnostic buffer
Upload service data
Backup and Restore
Reset to factory defaults
✓
✓
✓
✓
✓
✓
✓
7.6
ET 200MP support (PROFINET I/O)
ET 200MP operation support and firmware version
A check mark (✓) means that the operation is supported.
ET 200MP
V1.0
V2.0
V3.0
Scan for devices
✓
✓
✓
Flash LED
✓
✓
✓
Set IP address
✓
✓
✓
Set PROFINET name ✓ ✓ ✓
Set time to PG/PC time
Program update
Firmware update
✓
✓
✓
Put CPU in RUN/STOP
Reset CPU memory
Read Diagnostic buffer
Upload service data
Backup and Restore
Reset to factory defaults
✓
✓
✓