Siemens SIMATIC S7 - ET 200 M Support (PROFINET I;O); ET 200 Eco Support (PROFINET I;O)

SIMATIC Automation Tool device support
7.9 ET 200M support (PROFINET I/O)
SIMATIC Automation Tool V2.1 user guide
Manual, V2.1.1 07/2016, A5E33042676-AC
127
7.9
ET 200M support (PROFINET I/O)
ET 200M operation support and firmware version
A check mark (✓) means that the operation is supported.
ET 200M
V2.x
V3.x
V4.x
Scan for devices
✓
✓
✓
Flash LED
✓
✓
✓
Set IP address
✓
✓
✓
Set PROFINET name
✓
✓
✓
Set time to PG/PC time
Program update
Firmware update
✓
✓
✓
Put CPU in RUN/STOP
Reset CPU memory
Read Diagnostic buffer
Upload service data
Backup and Restore
Reset to factory defaults
✓
✓
✓
7.10
ET 200eco support (PROFINET I/O)
ET 200eco operation support and firmware version
A check mark (✓) means that the operation is supported.
ET 200eco
V6.x
V7.x
Scan for devices
✓
✓
Flash LED
✓
✓
Set IP address
✓
✓
Set PROFINET name ✓ ✓
Set time to PG/PC time
Program update
Firmware update
✓
✓
Put CPU in RUN/STOP
Reset CPU memory
Read Diagnostic buffer
Upload service data
Backup and Restore
Reset to factory defaults
✓
✓