Siemens SIMATIC S7 - Page 85

SIMATIC Automation Tool API for .NET framework
6.7 The IProfinetDevice interface
SIMATIC Automation Tool V2.1 user guide
Manual, V2.1.1 07/2016, A5E33042676-AC
85
Property Name
Return Type
Description
IP
uint
The IP Address of the device, represented as an
unsigned integer. The encoded IP Address uses
one byte to represent each decimal value in the IP
Address. For example, the encoded value
0xC0A80001 is equivalent to the more common
string representation of "192.168.0.1"
IPString
string
The IP Address of the device, represented as a
string in the form "xx.xx.xx.xx"
MAC
ulong
The unique MAC assigned to the device. The
encoded MAC address uses one byte to encode
each of the 6 octets defined for the address. For
example, the encoded MAC address
0x112233445566 is equivalent to the more com-
mon string representation of "11:22:33:44:55:66"
MACString
string
The unique MAC assigned to the device, repre-
sented as a string in the form "11:22:33:44:55:66".
MemoryResetAllowed
FeatureSupport
Does the device support a memory reset?
Modules
IModuleCollec-
tion
A collection of the modules plugged on the station.
See also IModuleCollection class (Page 116)
Name
string
The name of the device.
NewFirmwareVersion
string
These properties are used in the SIMATIC Auto-
mation Tool user interface are not relevant for API
operations.
NewDefaultGateway
string
NewIP
string
NewProfinetName
string
NewProgramName
string
NewRestoreName
ProfinetName
string
The PROFINET name for the device.
ProgramUpdateAllowed
FeatureSupport
Does the device support a program update?
ResetToFactoryAllowed
FeatureSupport
Does the device support reset to factory settings?
RestoreAllowed
FeatureSupport
Does the device support the restore features?
Selected
bool
This property is used in the SIMATIC Automation
Tool user interface and is not relevant to API op-
erations.
SerialNumber
string
The unique serial number for the device
Slot
uint
The slot number for the hardware item
SlotName
string
This property is used in the SIMATIC Automation
Tool user interface and is not relevant to API op-
erations.
StationNumber
uint
The station number of the device
SubSlot
uint
The subslot of the device: This value is used for
pluggable submodules such as SB-1200.(Signal
Board).
Supported
bool
Is the detected network device supported by cur-
rent SIMATIC Automation Tool API operations?