Siemens SIMATIC S7 - Page 307

IP244
C79000–B8576–C866–01
7–29
Signal Name Meaning
AW 5 FMLD Error message for the channel specified under KANR
Signal Name Meaning
A 7.0 PAFE Incorrect parameter setting
A 7.1 frei
A 7.2 frei
A 7.3
A 7.4
No. of parameter setting error (<––> DB-A, DB X 31.0
through 31 4) as a dual number ((A 7 3
––
>2
0
A77
––
>
A 7.5
th
roug
h
31
.
4)
as a
d
ua
l
num
b
er
((A
7
.
3
––
>
2
0
,
A
7
.
7
––
>
2
4
)
A 7.6
)
A 7.7
The following table shows the allocation of the flag area.
Flag Allocation
M 0.0 ”VKE 0”
M 0.1 ”VKE 1”
MB 4 Corresponds to EB 4
MB 5 Corresponds to EB 5
MB 6 Corresponds to EB 6
MB 7 Corresponds to EB 7
MB 8 Corresponds to AB 4
MB 9 Corresponds to AB 5
MB 10 Corresponds to AB 6
MB 11 Corresponds to AB 7
M 15.0 Edge flag for parameter setting errors
M 15.1 One-shot flag for parameter setting errors
MW 20 Old value of EW 4
MW 22 One-shot flag for EW 4 (edge interpretation)
MB 24 Channel number
M 25.0 Old value of E 7.5
M 26.0 One-shot flag for E 7.5 (edge flag)
MW 40 BGAD with indirect parameter setting of the FC 162
MW 42 DBNR with indirect parameter setting of the FC 162
MW 44 BEF with indirect parameter setting of the FC 162
MB 46 T_NR with indirect parameter setting of the FC 162
M 48.0 Trigger flag with indirect parameter setting of the FC 162
Allocation of the
flag area
FC162