Contents
IP244
C79000–B8576–C859–02
2–2
Contents Page
1 Technical Description 2–3
1.1 Application 2–3
1.2 Design 2–3
1.3 Mode of Operation 2–5
1.4 Technical Data 2–7
2 Installation and Operation 2–11
2.1 Inserting and Removing the Module 2–11
2.2 Connecting Signal Lines and the Power Supply 2–11
2.2.1 Analog Inputs (Plug Connector X3) 2–11
2.2.2 Digital Outputs and One Digital Input (Socket Connector X4) 2–12
2.3 Slots 2–14
2.4 Wiring between the PLC and the Plant 2–15
3 Operation 2–19
3.1 Configuring and Connecting the Analog Inputs 2–19
3.1.1 Wiring the Inputs for Channels 0 to 12 when Connecting Thermocouples 2–19
3.1.2 Wiring the Inputs for Channels 13 and 14 to Connect Transducers 2–21
3.1.3 Wiring the Inputs for Channel 15 (Compensation Channel) 2–22
3.1.4 Using the Module for Resistance-Type Sensors (Pt 100) 2–24
3.1.5 Configuring Analog Inputs 0 to 6 2–25
3.1.6 Configuring Analog Inputs 7 to 14 (15) 2–25
3.1.7 Line Break Monitoring 2–26
3.2 Digital Outputs and Comparator Channel 2–26
3.2.1 Digital Outputs 2–26
3.2.2 Comparator Channel 2–26
3.3 Interface to the CPU 2–27
3.4 Jumpers, Switches and Resistors RS
and RP 2–28
3.4.1 Setting the Module Address 2–32
3.4.2 Setting the Conversion Time Per Channel 2–33
3.4.3 Setting the Clock 2–34
3.4.4 BASP Evaluation 2–34
3.5 Pin Assignment 2–35
3.6 Pin Assignment of Connecting Cables 2–35
4 Spare Parts 2–37
To Next Page
Loading...
Need help?
General
