IFP V2, IFP V2 PRO, IFP V2 ETH 
Operating Instructions, 03/2023, A5E46641410-AE 
3 
Preface 
These operating instructions contain all the information you need for commissioning and 
using the Industrial Flat Panel SIMATIC IFP V2 and the Transceiver Unit. 
These operating instructions are intended both for programming and testing personnel who 
commission the devices and connect them to other units (automation systems, programming 
devices), and for service and maintenance technicians who carry out maintenance work or 
fault analyses. 
Basic knowledge required 
A solid background in personal computers and Microsoft operating systems is required to 
understand this manual. General knowledge in the field automation control engineering is 
recommended. 
Scope of the operating instructions 
These operating instructions apply to the following SIMATIC IFP V2 devices with article 
numbers 6AV7863-.....-2...: 
•  SIMATIC IFP1200 V2, IFP1500 V2, IFP1900 V2, IFP2200 V2, IFP2400 V2 
•  SIMATIC IFP1200 V2 extended, IFP1500 V2 extended, IFP1900 V2 extended, IFP2200 V2 
extended, IFP2400 V2 extended 
•  SIMATIC IFP1500 V2 ETH, IFP1900 V2 ETH, IFP2200 V2 ETH, IFP2400 V2 ETH 
•  SIMATIC IFP1200 V2 PRO, IFP1500 V2 PRO, IFP1900 V2 PRO, IFP2200 V2 PRO, 
IFP2400 V2 PRO 
These operating instructions also apply for the Transceiver Unit with the article number 
6AV7860-3EH00-0AA0. 
Conventions 
The following conventions apply in these operating instructions: 
•  The term "device" is used for all SIMATIC IFP V2 devices, SIMATIC IFP V2 PRO devices and 
the Transceiver Unit. 
•  The term "IFP" is also used for all SIMATIC IFP V2 devices and SIMATIC IFP V2 PRO devices. 
•  The devices IFP1200 V2, IFP1500 V2, IFP1900 V2, IFP2200 V2 and IFP2400 V2 are referred 
to as "standard versions" of the SIMATIC IFP V2 devices. 
•  The devices IFP1200 V2 extended, IFP1500 V2 extended, IFP1900 V2 extended, 
IFP2200 V2 extended and IFP2400 V2 extended are referred to as "extended versions" of 
the SIMATIC IFP V2 devices. 
•  The devices IFP1500 V2 ETH, IFP1900 V2 ETH, IFP2200 V2 ETH and IFP2400 V2 ETH are 
referred to as "ETH versions" or "Ethernet Monitors".