Siemens SIMOTICS L-1FN3 - Maintenance; Safety Instructions for Maintenance

Maintenance
9
9.1 Safety instructions for maintenance
WARNING
Risk of injury as a result of inadvertent traversing motions
If, with the motor switched on, you work in the traversing range of the motor, and the motor
undesirably moves, this can result in death, injury and/or material damage.
• Always switch o󹪜 the motor before working in the traversing range of the motor. Ensure that
the motor is in a completely no-voltage condition.
WARNING
Risk of death and crushing as a result of permanent magnet 󹪝elds
Severe injury and material damage can result if you do not take into consideration the safety
instructions relating to the permanent magnet 󹪝elds of the secondary sections.
• Observe the information in Chapter "Danger from strong magnetic 󹪝elds (Page29)".
Naturally-Cooled 1FN3 Linear Motors
Operating Instructions, 06/2023, A5E52220465B AB 109