Siemens SIMOTICS L-1FN3 User Manual

The documentation is divided into the following categories:
Table 1-1 SIMOTICS / SIMOGEAR / SINAMICS documentation
Information Documentation
class
1)
Content Target group
General information Con󹪝guration Man‐
ual
Rules, guidelines, and tools for con󹪝g‐
uring products, systems, and plants.
Also contains information on the oper‐
ating and ambient conditions for hard‐
ware and software, the use of func‐
tions, as well as on circuit diagrams
and terminal diagrams and the instal‐
lation of software insofar as this is nec‐
essary for commissioning.
Planners, con󹪝guration engineers
Device information Installation Instruc‐
tions
All relevant information on setting up,
installing and cabling, as well as the
required dimensional drawings and cir‐
cuit diagrams
Installation personnel, commissioning
engineers, service and maintenance
personnel
Basic information Operating instruc‐
tions
Comprehensive collection of all infor‐
mation necessary for the safe opera‐
tion of products, plant/system parts
and complete plants (IEC82079)
Machine operators, plant operators
Compact instruc‐
tions
Essential contents of the operating in‐
structions in a reduced and condensed
form
Machine operators, plant operators
Product Information Information that only becomes known
shortly before or even after start of de‐
livery and is therefore not included in
the associated user documentation
Planners, con󹪝guration engineers,
technologists, installation personnel,
constructors; commissioning engi‐
neers, machine operators, program‐
mers, service and maintenance per‐
sonnel
Online help Instructions for con󹪝guring, program‐
ming, and commissioning
Con󹪝guration engineers, program‐
mers, commissioning engineers
1)
Not all documentation classes are available for every SIMOTICS / SIMOGEAR / SINAMICS product.
1.4 Service and Support
1.4.1 Siemens Industry Online Support on the Web
Description
The following is available via Siemens Industry Online Support (
https://
support.industry.siemens.com/cs/ww/en/), among others:
• Product support
• Global forum for information and best practice sharing between users and specialists
Introduction
1.4Service and Support
Naturally-Cooled 1FN3 Linear Motors
10 Operating Instructions, 06/2023, A5E52220465B AB

Siemens SIMOTICS L-1FN3 Specifications

General

Brand	Siemens
Model	SIMOTICS L-1FN3
Category	Engine
Language	English