Siemens SIMOTICS L-1FN3 User Manual

European Low-Voltage Directive
SIMOTICS motors comply with the Low-Voltage Directive 2014/35/EU.
European Machinery Directive
SIMOTICS motors do not fall within the scope covered by the Machinery Directive.
However, the use of the products in a typical machine application has been fully assessed for
compliance with the main regulations in this directive concerning health and safety.
European EMC Directive
SIMOTICS motors do not fall within the scope covered by the EMC Directive. The products
are not considered as devices in the sense of the directive. Installed and operated with
a converter, the motor - together with the Power Drive System - must comply with the
requirements laid down in the applicable EMC Directive.
European RoHS Directive
The SIMOTICS motor series complies with the Directive 2011/65/EU regarding limiting the use
of certain hazardous substances.
European Directive on Waste Electrical and Electronic Equipment (WEEE)
SIMOTICS motors comply with the 2012/19/EU directive on taking back and recycling waste
electrical and electronic equipment.
European Directive 2005/32/EC de󹪝ning requirements for environmentally friendly
design of electric motors
The SIMOTICS motor series is not subject to Regulation (EC) No. 640/2009 for
implementation of this directive.
European Directive 2009/125/EC de󹪝ning ecodesign requirements of electric motors
and speed controls
The SIMOTICS motor series is not subject to (EU) Regulation 2019/1781 for implementation
of this directive.
Eurasian conformity
SIMOTICS motors comply with the requirements of the Russia/Belarus/Kazakhstan (EAC)
customs union.
China Compulsory Certi󹪝cation
SIMOTICS motors do not fall within the scope covered by the China Compulsory Certi󹪝cation
(CCC).
CCC negative certi󹪝cation (https://support.industry.siemens.com/cs/de/de/view/109769143)
Underwriters Laboratories
SIMOTICS motors are generally in compliance with UL and cUL as components of motor
applications, and are appropriately listed.
Speci󹪝cally developed motors and functions are the exceptions in this case. Here, it is crucial
that you carefully observe the content of the quotation and that there is a UL or cUL mark on
the rating plate!
Description
3.1Technical features and ambient conditions
Naturally-Cooled 1FN3 Linear Motors
28 Operating Instructions, 06/2023, A5E52220465B AB

Siemens SIMOTICS L-1FN3 Specifications

General

Brand	Siemens
Model	SIMOTICS L-1FN3
Category	Engine
Language	English