Interfaces
3.9 Measuring sockets
SIMOTION D4x5-2
60 Manual, 11/2010
Interface assignments
Table 3- 19 Measuring sockets T0, T1, T2
Socket Function Technical specifications
T0 Measuring socket 0
T1 Measuring socket 1
T2 Measuring socket 2
7
7
0
7
M Ground
Voltage: 0 V to 5 V
Resolution: 8 bits
Load current: Max. 3 mA
Continuous short-circuit-proof
Reference potential is terminal M
The measuring sockets are suited for multiple-spring wire connectors with a diameter of 2 mm.
Note
The measuring sockets support commissioning and diagnostic functions. Connection for
normal operation is not permitted.
Measuring socket position
)URQWVLGHRIWKHFRQWUROXQLW
0HDVXULQJVRFNHWV
Figure 3-9 Measuring socket position
To Next Page
Loading...
