SIMOTION D4x5-2
Manual, 11/2010
63
Technical data of the D4x5-2
4
4.1 Shipping and storage conditions
Shipping and storage conditions
With regard to shipping and storage conditions, the SIMOTION D4x5-2 surpasses the
requirements specified in EN 61131-2.
The following conditions apply to modules that are shipped and stored in the original
packaging.
Conditions
Table 4- 1 Shipping conditions
Type of condition Permissible range/class
Transport Long-term storage
Climate class 2K4 acc. to EN 60721-3-2 1K4 acc. to EN 60721-3-1
Temperature From -40° C to +70° C From -25° C to +55° C
Relative humidity From 5% to 95% From 10% to 100%
Height Max. 5000 m above sea level
Note: Max. 4000 m for SINAMICS S120 drive components (motor
modules, etc.)
1)
Atmospheric pressure
> 620 hPa
< 1060 hPa
The specified values apply to a
transportation altitude of up to
4000 m
> 620 hPa
< 1060 hPa
The specified values apply to a
storage altitude of up to 4000 m
Biological environmental
conditions
Class 2B1 acc. to EN 60721-3-2 Class 1B1 acc. to EN 60721-3-1
Chemically active
environmental conditions
Class 2C2 acc. to EN 60721-3-2 Class 1C2 acc. to EN 60721-3-1
1)
Details can be found in the
SINAMICS S120 Control Units and Supplementary System
Components
Manual
To Next Page
Loading...
Need help?
General
