Description
1.6 Safety notes
SIMOTION D4x5-2
Manual, 11/2010
25
1.6 Safety notes
Note the following safety information when working with the control unit and its components.
NOTICE
The 80 mm clearances above and below the components must be observed. The unit
protects itself from overheating by shutting down.
CAUTION
An option board may only be inserted and removed when the control unit and option board
are disconnected from the power supply.
The CompactFlash card may only be inserted or removed when the control unit is
disconnected from the power supply.
The SIMOTION D4x5-2 is in a de-energized state when all the LEDs are OFF.
To Next Page
Loading...
Need help?
General
