Siemens SIMOTION D410-2 DP User Manual

3. Open the project.
4.
Go online with the SIMOTION D410-2.
5. In the project navigator, select the SIMOTION D410-2 and select the "Target system" >
"Load" > "Save archived project to card..." menu command.
6. In the dialog that is displayed, select the project and click "Open". This saves the project
to the CompactFlash card as Project.zip in the directory: USER\SIMOTION\HMI\PRJLOG.
Note
If you want to load the current project from the card, select the "Target system" > "Copy
archived project from card to PG/PC..." menu command.
Prerequisite is that you have backed up the project with "Save archive project on card..."
each time a change was made.
Additional references
Detailed information on loading data to the target device can be found in the
SIMOTION
Runtime Basic Functions Function Manual.
Commissioning (software)
7.2 Performing an offline configuration
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015 161

Siemens SIMOTION D410-2 DP Specifications

General

Brand	Siemens
Model	SIMOTION D410-2 DP
Category	Controller
Language	English