Siemens SIMOTION D410-2 DP User Manual

Figure 7-33 Configuration of a global measuring input for SIMOTION D410-2
Additional references
Detailed information on the configuration of the TO measuring input can be found in the
SIMOTION Output Cams and Measuring Inputs Function Manual.
7.11.2 Configuring local measuring inputs
Local measuring inputs are drive-related measuring inputs. The configuration is performed via
drive parameters.
For further details, see:
● Configuring drive-related I/Os (without symbolic assignment) (Page 317) In the Appendix
● SIMOTION Output Cams and Measuring Inputs Function Manual
7.11.3 Configuring output cams / cam tracks
Overview
The type of cam output must be selected during the configuration of the TO outputCam and
TO camTrack.
Commissioning (software)
7.11 Configuring technology objects and I/O variables
SIMOTION D410-2
212 Commissioning and Hardware Installation Manual, 01/2015

Siemens SIMOTION D410-2 DP Specifications

General

Brand	Siemens
Model	SIMOTION D410-2 DP
Category	Controller
Language	English