Special displays in the "version" field:
● "Select"
means that no TP product version has been selected; this state occurs when older
projects, in which the selection of a specific product version was not supported, are
upgraded. If the project is loaded to the CPU without having previously made a selection,
then the latest available technology package is loaded automatically.
● "---" means that no version can be determined (e.g. for the TP DCBlib or for older CPU
versions < V4.1). If no version can be determined, you must select "---".
Selecting the TP product version
The desired technology package is selected with fine granularity in SIMOTION SCOUT at
"Target device" > "Select technology packages ...".
Figure 8-7 Selecting technology packages (based on the example of the D410)
Note
Device
diagnostics can provide information on which technology package product version has
been loaded to a CPU.
Loading technology packages to the target device
Technology packages are only loaded to the target device if no technology package has been
loaded so far or if "Load to file system" is executed.
Service and maintenance
8.3 Customizing the project
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015 277
To Next Page
Loading...
Need help?
General
