Siemens SIMOTION D410-2 DP User Manual

Mounting on mounting plate
1.
The mounting plate is attached to the control cabinet.
2. The SIMOTION D410-2 is snapped on to the mounting plate.
Figure 3-2 Mounting the SIMOTION D410-2 on the mounting plate
Note
When operating away from the Power Module, generally the power supply must be realized
via the power supply connection (X124).
It
is also not possible to use the Safety Integrated Extended functions via the onboard terminals
(F-DI, F-DO) when operating away from the Power Module.
Observe the information on control cabinet installation in the SINAMICS S120 AC Drive
Manual.
Installing
3.3 Mounting the SIMOTION D410-2 on the mounting plate
SIMOTION D410-2
42 Commissioning and Hardware Installation Manual, 01/2015

Siemens SIMOTION D410-2 DP Specifications

General

Brand	Siemens
Model	SIMOTION D410-2 DP
Category	Controller
Language	English