Siemens SIMOTION TM15 Commissioning Manual

Error messages
TM15 / TM17 High Feature Operating Manual
54 Commissioning Manual, 05/2009
Error correction
If problems arise during commissioning of the TM15 or TM17 High Feature, please verify the
following:
● Make sure that the planned application is permitted. Note the information in the
SIMOTION constraint list (see SCOUT CD).
● Check the firmware version of the TM15/TM17 High Feature and update it if necessary.
● Delete the Fast I/O configuration via SCOUT. Select, for example, the "D435" controller in
the project tree. Right-click to open the context menu and select FastIO --> Delete
configuration. Then execute Transfer to HW Config in the SINAMICS configuration
screen form.
● If necessary, delete the user data on the CompactFlash Card and completely reload the
project. Then execute Copy RAM to ROM.
● Restart (power on or hot restart) the SINAMICS or SIMOTION D device. The new I/O
channel parameters do not take effect until you execute the restart.
See also
Updating the firmware (Page 46)

Siemens SIMOTION TM15 Specifications

General

Brand	Siemens
Model	SIMOTION TM15
Category	Touch terminals
Language	English