Siemens SINAMICS GM150 - Page 106

The function keys
Press the appropriate function key ② for navigation, for inputs and to change values within the
menus. The associated assigned function is written in plain text ① above the corresponding
function key.


Ⴍ
Ⴃ
'HILQHRSHUDWLRQVFUHHQ
2SHUVFUHHQW\SH
6FUHHQW\SH
6FUHHQYDOXHV
+HOS
%DFN
ႱႧ&KDQJH
EDUV
ႱႧ



581
$/$50
)$8/7
F5
F4
F3
F2
F1
Figure 8-3 Function keys of the AOP 30
Changing parameters
Press the appropriate function key ②. The assigned function ① can vary from menu to menu.
For example, the <F5> function key is assigned the <OK> or <◀ ▶ change> functions.
1. Using the function keys ▲, ▼, ◀, ▶ select the parameter that you want to change.
2. To change the selected parameter, activate the parameter according to the menu.
Press the <OK> function key.
Use either the numeric keypad or the function keys to modify the selected parameter.
<▲>,< ▼>, <◀>, <▶>.
3. You must confirm the change according to the menu.
Press the <OK> function key.
4. Press the <Back> function key to scroll back to the main menu. Press the <MENU> function
key to directly call the main menu.
Calling up parameter Help
1. Press the <▲> or <▼> function key to select the desired parameter.
2. Press the <Help> function key.
3. Press the <▲> or <▼> function key to select the desired Help topic.
4. Press the <OK> function key to call the selected Help topic.
5. Press the <Back> function key to exit the Help function.
Operation
8.3 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3810-2LN31-8AA2
106 Operating Instructions Rev.201910281332 EXAMPLE