Siemens SINAMICS GM150 - Menu Description and Setting Options; Operation Screen

The following access levels are possible:
Access level Functions
1: Standard Sufficient for simple applications. The default setting is "1 standard".
2: Extended
3: Expert The structure of the function can be changed by interconnecting BICO parame‐
ters. Only experts should make this setting.
4: Special access This setting is only used for service purposes. A password is required upon acti‐
vation.
1. Press the <▲> or <▼> function key to select the "Access level" function.
2. Press the <Change> function key to select the desired access level.
3. Press the <Back> function key to exit the menu.
Note
Changing the access levels
During the device commissioning, prior to a change of the access level, e.g. from access
level 2 to access level 3, select the status "0: ready)".
For further information, refer to the Commissioning / service device commissioning section.
8.3.3 Menu description and setting options
The individual menus of the AOPs with their setting options are described in the following.
To make things easier for you, the respective section of the menu structure is illustrated at the
beginning of each chapter.
8.3.3.1 Operation screen
The menu structure of the operation screen
0DLQPHQX
2SHUDWLRQVFUHHQ
+HOS
6HO3DU
&KDQJH
'LDJ
&XUUHQW
IDXOWV
&XUUHQW
DODUPV
2OGIDXOWV
2OGDODUPV
Figure 8-5 Menu structure of the operation screens
Operation
8.3 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3810-2LN31-8AA2
116 Operating Instructions Rev.201910281332 EXAMPLE