Siemens SINAMICS GM150 - Connecting ground

Scaling
Table 8-2 Scaling
Variable Scaling parameter Default for quick commissioning
Reference speed 100% = p2000 p2000 = Maximum speed (p1082)
Reference voltage 100% = p2001 p2001 = 1000 V
Reference current 100% = p2002 p2002 = Current limit (p0640)
Reference torque 100% = p2003 p2003 = 2 x rated motor torque
Reference power 100% = r2004
Reference frequency
Reference control factor 100% = Maximum output voltage without
overload
Reference flux 100% = Rated motor flux
Reference temperature 100% = 100° C
8.3.2.2 Control settings
You can set the control keys of the AOP as desired.
1. Press the <MENU> key.
2. Press the ▲ or ▼ function key to select the <Commissioning/service> entry.
3. Press the <OK>. function key and the ▼ function key to select the <AOP settings> entry.
4. Press the ▼ function key to select the <Control settings> entry from this menu. The display
changes to the Control settings menu.
Ⴍ
&RQWUROVHWWLQJV
6DYH/2&$/PRGH
2IILQ5(027(
/2&$/5(027(DOVRGXULQJRSHU
5HG2))NH\DFWVDV
+HOS
%DFN
ႱႧ&KDQJH

DNWLY
ႱႧ
1R
ႱႧ
1R
ႱႧ
1R
ႱႧ
2))
5. Press the ▲ or ▼ function key to select the desired entry. Press the <Change> function key
to change the setting.
6. Press the <Back> function key to confirm the entries.
You can find the description and setting options for the individual menu items in the following.
Operation
8.3 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3810-2LN31-8AA2
Operating Instructions Rev.201910281332 EXAMPLE 111