Siemens SINAMICS GM150 - PROFIBUS Interface, Diagnostics Leds, Address Switches

Required hardware components:
● Prefabricated PROFIBUS or MPI cable
● Field PG
● CP5512 interface adapter (when a laptop is used)
● CP5611 interface card (when a PC is used)
7.1.1 PROFIBUS interface, diagnostics LEDs, address switches
The PROFIBUS connection, diagnostic LEDs and the PROFIBUS address switch are located
on the control unit.



5'<
&20
237
'3
+
'3
/
352),1(7
;
① X126 PROFIBUS connection
② PROFIBUS diagnostics LEDs
③ PROFIBUS address switches
Figure 7-1 PROFIBUS interface
X126 PROFIBUS interface ①


Figure 7-2 X126 PROFIBUS connection
Start-up
7.1 Description and configuration of the PROFIBUS interface
SINAMICS GM150 6SL3810-2LN31-8AA2
96 Operating Instructions Rev.201910281332 EXAMPLE