Siemens SINAMICS GM150 - Start-up; Venting the converter

The operation screen
The operation screen displays the most important status variables for the drive:
In the factory setting, the following values are displayed:
● Operation status of the drive
● Direction of motor rotation
● Time
● Ten parameters (numerical display)
9(&7252))
9B'& 9,B,7 $HII
$867 )B2)) +]
3:,5.N:/7,7 
7B/7 r&,',67 $HII
,4,67 $HII8B2)) 9HII
+HOS
FKDQJH
6HO3DU
'LDJ

Operation screen
Calling up operation screens
There are three options for calling up the operation screens:
● Once the system has started, press the <F5> key.
● Wait for five minutes (do not press any buttons). The Operation screen is called up
automatically.
● In the main menu, select "Operation screen". Press the <Select> function key.
Note
When there is a fault, the fault screen is automatically displayed.
Further settings
You can adjust the shape of the display and the displayed values to your liking. You can find
more detailed information in the "Defining operation screens" section.
The other menus of the operation screen
The menus that you can call up from the operation screen using the function keys are described
below.
Function key Function
Sel. Par. Selects a parameter (value or bar) of the operation screen.
Help Call up of an explanatory help text for the selected display. This help text de‐
scribes, e.g. which parameter forms the basis for the display.
Operation
8.3 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3810-2LN31-8AA2
Operating Instructions Rev.201910281332 EXAMPLE 117